CBR 125 R4

2004

Workshop data and amount of filling

  
starting from fG. - NR.

MLHJC34A*45~

Service manual: 64 KPP 00  
Engine/drive Measure Unit Part number
Rated output/number of revolutions 10/10000 KW/min-1  
Max. torque/number of revolutions 10,1/8000 Nm/min-1  
Vmax 110 km/h/min-1  
Drilling x stroke/capacity 58x47,2/124,7 mm/cm3  
Piston run play 0,01 - 0,04 mm  
Valve clearance coldly I/O 0,06/0.27 +-0,02 mm  
Engine oil amount of filling total approx. 1,3 Litre  
Engine oil amount of filling change approx. 1,0 Litre  
Engine oil specification SOW 10W30 API SE-SG  
Oil filter   Filter 15421-035-010
Coolant quantity approx. 1,0 Litre (with header tank)
Clutch liquid specification      
Secondary transmission pinion 15 Teeth 23801-KBP-900
Secondary transmission chain wheel 42 Teeth 41200-KPP-860
Secondary transmission driving chain 124 Roles 40530-KPP-901
Driving chain tension 25-35 mm  
Driving chain designation DID428V13  
Carburetor
Carburetor/type/design VK6AB    
Main jet 118 #  
Leerlaufdüse 38 #  
Nozzle needle, position from above      
Schwimmerstand 13 mm  
Idling speed 1400 + - 100 min1  
Mixture adjustment screw 1,75 Revolutions  
Fuel method lead free normally 91 RON
Fuel filter      
Type of air cleaner   17210-KPP-901
Chassis
Production stage dimension in front 80/90 17 M/C 44P    
Production stage dimension in the back 100/80 17 M/C 52P    
Manufacturer in front/in the back/type IRC NR73s
Manufacturer in front/in the back/type    
Manufacturer in front/in the back/type    
min. Air pressure in front solo/m.Bel. 2,0/2,0 bar  
min. Air pressure in the back solo/m.Bel. 2,25/2,25 bar  
Brake fluid specification DOT 4    
Brake lining type in front 1 disk   06455-KPP-901
Brake lining type in the back 1 disk   06435-KPP-901
Fork oil amount of filling right 206/131 cm3/mm  
Fork oil amount of filling left 206/131 cm3/mm  
Fork oil specification SOW 10 W    
Guidance bearing prestressing 1,0 - 1,5 kg (course balance)  
Electrical connection
Battery/type YTZ6S 12/5 V/Ah 31500-KPP-901
Spark plug NGK/type CR8E/0,7-0,8 mm distance 98059-58816
Spark plug DENSO/type U24ESR-N mm distance 98059-58826
Ignition “F” - mark 12º/1400 Degree of v. OT/min1  
Zündverstellung      
Generator/stator yellow-yellow 0,2 - 0,6 with 20ºC  
Pulse generator min. 0,7 V peak voltage
Ignition coil min. 100 V peak voltage
Headlight 2x 12/35/35 V/W  
back u. Stop light lamp 12/21/5 V/W  
Signal light lamp 12/21 V/W

Maintenance plan

 The respective inspections are to be accomplished at the latest 1 year after the preceeding inspection.
  Service Interval Odometer reading x 1000
Servicing point Remark 1 4 8 12 16 20 24 etc.
Coolly, cooling system       P   P   P  
Coolant 1)     P   P   P  
Fuel pipes, - filters or filter (if available)     P P P P P P  
Gasdrehgriff, gas course, Chokebetätigung     P P P P P P  
Spark plugs 0.7-0.8 mm   P A P A P A  
Air cleaner 2)   P P A P P A  
Crank case exhaust 5)   P P P P P P  
Valve clearance   P P P P P P P  
Engine oil   A   A   A   A  
Ölsieb ==>>
Coupler cover seal 11393-KGH-900 necessarily!		         P     P  
Driving chain, chain wheels, sliding rail P all 1000 km or more frequently P P P P P P P  
Clutch manipulation   P P P P P P P  
Brake linings, pedal play, tightness   P P P P P P P  
Brake fluid 1)   P P P P P P  
Guidance head camp (operation smoothness)   P P P P P P P  
front u. Hinterradfederung, absorption   P P P P P P P  
Side stand function 4) P P P P P P P  
Wheels and tire (air pressure) 2,0/2.25 bar P P P P P P P  
Nuts/mothers, screws, fastening parts   P   P   P   P  
Stop light switch, headlight-aiming   P P P P P P P  
Idling speed 1400 + - 100 min1 P P P P P P P  
Secondary air system         P     P  
                   
Vehicle and/or driver manual for possibly applicable change regulations in accordance with the instructions HONDA engine Europe (North) GmbH examine.   P P P P P P P  
                   
Final inspection with test run special considering the road safety: Steering element, brakes, circuit, clutch, lighting, signaling devices, control lights, instruments   P P P P P P P  
                   
Inspection time Hours 1,4 1,8 2,1 2,6 2,1 1,8 2,8 *  **
 
* Additional work such as cooling liquidness changes or brake linings does not renew is here not contained.
** only valve clearance examine, with valve clearance correction can the work expended depending upon model until 2.0 hr. increase!
P: Examines, cleaning or replacement, if necessary. A: Replacement. S: Lubricants
Shorten Wartungsintervalle during frequent rain travels